Option Description
Warnings and
Errors
This option will cause the boot process to only pause when warnings or errors are detected.
● Prompt on Warnings and Errors—enabled by default
● Continue on Warnings
● Continue on Warnings and Errors
NOTE: Error deemed critical to the operation of the system hardware will always halt the system.
Sign of Life
Indication
This option is disabled by default.
Virtualization support screen options
Option
Description
Virtualization Allows you to enable or disable the Intel Virtualization Technology.
Enable Intel Virtualization Technology—default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities
provided by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O - enabled by default.
Trusted
Execution
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
hardware capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization
Technology, and the Virtualization technology for direct I/O must be enabled to use this feature.
Trusted Execution - disabled by default.
Wireless screen options
Option
Description
Wireless Device
Enable
Allows you to enable or disable the internal wireless devices.
● WWAN/GPS
● WLAN/WiGig
● Bluetooth
All the options are enabled by default.
NOTE: IMEI number for WWAN can be found on the outer box or the WWAN card.
Maintenance screen options
Option
Description
Service Tag Displays the Service Tag of your tablet.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.
BIOS Downgrade This controls flashing of the system firmware to previous revisions. Option 'Allow BIOS downgrade' is
enabled by default.
Data Wipe This field allows users to erase the data securely from all internal storage devices. Option 'Wipe on Next
boot' is not enabled by default. The following is list of devices affected:
● Internal M.2 SATA SDD
● Internal M.2 PCIe SSD
● Internal eMMC
56 System setup
To Next Page
Loading...
