Lift the docking board after releasing the cable from the adhesive.
Installing the smart card cage
1. Insert the smart cage into the slot on the tablet.
2. Replace the M2.0 x 2.5 screws screws to secure the smart card cage to the tablet.
3. Connect the smart cable to the smart card module.
4. Install the:
a. display panel
b. uSIM/microSD card
NOTE: uSIM card is installed only on tablets shipping with WWAN module.
5. Follow the procedure in After working inside your tablet.
System Board
Removing system board
1. Follow the procedure in Before working inside your tablet.
2. Remove the:
a. uSIM/microSD card
NOTE: Micro-SIM card slot is available only on tablets shipping with WWAN module.
b. display panel
c. battery
d. SSD card
e. system fan
f. WLAN card
Using your tablet
33
To Next Page
Loading...
