Dell Latitude 5310 2-in-1 - System board

Next steps
1. Replace the LED board.
2. Replace the speaker.
3. Replace the battery.
4. Replace the base cover.
5. Replace the microSD card.
6. Follow the procedure in after working inside your computer.
System board
Removing the system board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the speaker.
6. Remove the heatsink.
7. Remove the memory module.
8. Remove the system fan.
9. Remove the DC-in.
10. Remove the WLAN card.
11. Remove the WWAN card.
Steps
1. Remove the three (M2x3) screws that secure the memory module frame to the system board [1].
2. Remove the memory module frame away from the computer [2].
Disassembly and reassembly
63