2. Remove the:
a. base cover
b. battery
c. memory module
d. hard drive
e. SSD card
f. SSD frame
g. WLAN card
h. WWAN card (optional)
i. keyboard lattice
j. keyboard
k. chassis frame
l. system board
3. To remove the speakers:
a. Release the speaker cable through the routing channels [1].
b. Lift the speaker away from the computer [2].
Installing the speaker
1. Insert the speaker module aligning it with the nodes on the chassis.
2. Route the speaker cable through the routing channels.
3. Install the:
a. system board
b. chassis frame
c. keyboard
d. keyboard lattice
e. WLAN card
f. SSD frame
g. SSD card
h. hard drive
Removing and installing components
35
To Next Page
Loading...
