Camera
Removing camera
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
c. WLAN card
d. WWAN card (optional)
e. display hinge cover
f. display assembly
g. display bezel
h. display panel
3. To remove the camera:
a. Disconnect the camera cable from the connector on the camera module [1].
b. Carefully pry and lift the camera module from the display back cover [2].
Installing camera
1. Insert the camera into the slot on the display back cover.
2. Connect the camera cable to the connector on the camera module.
3. Install the :
Removing and installing components
49
To Next Page
Loading...
