Coin cell battery
Removing the coin cell battery
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
3 To remove the coin cell battery:
a Disconnect the coin cell battery cable from the connector on the system board [1].
b Pry the coin cell battery to release from the adhesive and lift it away from the system board [2].
Installing the coin cell battery
1 Place the coin cell battery on the system board.
2 Connect the coin cell battery cable to the connector on the system board.
NOTE
: Route the coin cell battery cable carefully to avoid damaging the cable.
3 Install the:
a battery
b base cover
4 Follow the procedure in After working inside your computer.
22
Removing and installing components
To Next Page
Loading...
