Display panel
Removing the display panel
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c WWAN
d WLAN card
e hinge cap
f display assembly
g display bezel
3 Remove the M2.0x3.0 screws (4) that secure the display panel to the display assembly [1] and lift to turn over the display panel to
access the eDP cable [2].
4 To remove the display panel:
a Peel oî the adhesive tape [1].
b Lift the blue tape that secures the display cable [2].
c Lift the latch to disconnect the display cable from the connector on the display panel [3] [4].
50
Removing and installing components
To Next Page
Loading...
