Installing the touchpad panel
1 Place the touchpad panel into the slot on the system board.
2 Tighten the M2.0x3.0 screws to secure the touchpad panel.
3 Connect the touchpad cable.
4 Connect the SmartCard reader cable to the laptop.
5 Install the:
a chassis frame
b SSD card or hard drive
c WWAN
d WLAN card
e battery
f base cover
6 Follow the procedure in After working inside your computer.
SmartCard module
Removing the SmartCard reader
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
Removing and installing components
37
To Next Page
Loading...
