b Remove the M2x1.5 (2) screws that secure the power button board on the tablet [2].
c Slide and remove the power button board from the tablet [3].
Installing the power button board
1 Insert the power button board into the slot on the tablet.
2 Replace the M2x1.5 (2) screws to secure the power button board to the tablet.
3 Connect the power button board cable and close the latch on the tablet.
4 Install the:
a battery
b display panel
c microSIM card and microSD card
5 Follow the procedure in After working inside your tablet.
WLAN card
Removing the WLAN card
1 Follow the procedure in Before working inside your tablet.
2 Remove the:
a microSIM card and microSD card
b display panel
c battery
3 To remove the WLAN card:
Removing and Installing components
25
To Next Page
Loading...
