Installing the audio port
1 Place and insert the audio port into the connector on the system board.
2 Replace the M2X3 (2) screw to secure audio port on the system board.
3 Ax the audio port on the system board.
4 Connect the audio port cable to the connector.
5 Install the:
a battery
b display panel
c microSIM card and microSD card
6 Follow the procedure in After working inside your tablet.
Front facing camera
Removing the front camera
1 Follow the procedure in Before working inside your tablet.
2 Remove the:
a microSIM card and microSD card
b display panel
c battery
3 To remove the front facing camera:
a Lift the latch and disconnect the camera connector [1].
b Remove the M1.6x2.5 (2) screws that secure the camera on the system board [2].
c Lift the front camera from the tablet [3].
30
Removing and Installing components
To Next Page
Loading...
