WWAN card
Removing the WWAN card
1 Follow the procedure in Before working inside your tablet.
2 Remove the:
a microSIM card and microSD card
b display panel
c battery
3 To remove the WWAN card:
a Remove the M2x2.0 (1) screw securing the WWAN bracket [1].
b Lift the WWAN bracket from the tablet [2].
c Disconnect the antenna cables from the WWAN card [3].
d Slide and lift the WWAN card from the connector on the system board [4].
Installing the WWAN card
1 Insert the WWAN card into the connector on the system board.
2 Connect the antenna cables to the WWAN card.
3 Insert the WLAN bracket to the WWAN card.
28
Removing and Installing components
To Next Page
Loading...
