Installing the rear camera
1 Insert the rear camera module into the slot on the tablet.
2 Replace the M1.6x2.5 (1) screw to secure the rear camera module.
3 Connect the rear camera cable to the system board.
4 Connect the front camera cable to the system board.
5 Install the:
a battery
b display panel
c microSIM card and microSD card
6 Follow the procedure in After working inside your tablet.
Coin cell battery
Removing the coin cell battery
1 Follow the procedure in Before working inside your tablet.
2 Remove the:
a microSIM card and microSD card
b display panel
Removing and Installing components
33
To Next Page
Loading...
