Installing the system board
1 Align the system board with the screw holders on the tablet.
2 Replace the M1.6x1.5 (4) screws to secure the system board to the tablet.
3 Connect the USH board cable, docking board cable, audio board cable, power button cable to the connectors on the system board.
4 Install the:
a thunderbolt over Type-C USB bracket
b coin cell battery
c rear camera
d front camera
e WWAN card
f SSD card
g WLAN card
h battery
i display panel
j microSIM card and microSD card
5 Follow the procedure in After working inside your tablet.
Speaker
Removing the speaker
1 Follow the procedure in Before working inside your tablet.
2 Remove the:
a microSIM card and microSD card
b display panel
c battery
d WLAN card
e SSD card
f WWAN card
g front camera
h rear camera
i coin cell battery
j thunderbolt over Type-C USB bracket
k system board
3 Unroute the WLAN cable from the speaker retension clip [1,2,3].
Removing and Installing components
39
To Next Page
Loading...
