c battery
d front facing camera
3 To remove the coin cell battery:
a Disconnect the coin cell battery cable from the connector on the system board [1].
b Pry the coin cell battery to release from the adhesive and lift it away from the system board [2].
Installing the coin cell battery
1 Place the coin cell battery into the slot on the system board.
2 Connect the coin cell battery cable to the connector on the system board.
3 Install the:
a front facing camera
b battery
c display panel
d microSIM card and microSD card
4 Follow the procedure in After working inside your tablet.
34
Removing and Installing components
To Next Page
Loading...
