b display panel
c battery
3 To remove the SSD module:
a Remove the M2x2.0 (1) screw securing the SSD shield [1].
b Lift the SSD shield away from the tablet [2].
c Slide and lift the SSD module from the slot on the tablet [3].
Installing the SSD module
1 Insert the SSD module into the connector on the system board.
2 Install the SSD shield on the SSD module.
3 Replace the M2x2.0 (1) screw to secure SSD shield.
NOTE
: Align the shield carefully or else it may break.
4 Install the:
a battery
b display panel
c microSIM card and microSD card
5 Follow the procedure in After working inside your tablet.
Removing and Installing components
27
To Next Page
Loading...
