3 Route the WLAN cable through the retention clips on the tablet.
4 Install the:
a system board
b thunderbolt over Type-C USB bracket
c coin cell battery
d rear camera
e front camera
f WWAN card
g SSD card
h WLAN card
i battery
j display panel
k microSIM card and microSD card
5 Follow the procedure in After working inside your tablet.
Back cover
Replacing the back cover
1 Follow the procedure in Before working inside your tablet.
2 Remove the:
a microSIM card and microSD card
b display panel
c battery
d power button board
e WLAN card
f SSD card
g WWAN card
h audio port
i front camera
j rear camera
k coin cell battery
l Docking board
m thunderbolt over Type-C USB bracket
n system board
3 The component you are left with is the back cover.
Removing and Installing components
41
To Next Page
Loading...
