Dell Latitude 7290 - Memory Modules; Removing Memory Module

b Lift the metal bracket [2].
c Disconnect the WLAN cables from the connectors on the WLAN card [3].
d Remove the WLAN card from the system [4].
Installing WLAN card
1 Insert the WLAN card into the connector on the system board.
2 Connect the WLAN cables to the connectors on the WLAN card.
3 Place the metal bracket and tighten the M2.0 x 3.0 screw to secure it to the WLAN card.
4 Install the following:
a battery
b base cover
5 Follow the procedure in After working inside your computer.
Memory modules
Removing memory module
1 Follow the procedure in Before working inside your computer.
2 Remove the following:
a base cover
b battery
3 To remove the memory module:
18
Removing and installing components