Removing the display panel
1 Follow the procedure in Before working inside your computer.
2 Remove the following components:
a base cover
b battery
c WLAN card
d WWAN card
e display assembly
3 To remove the display panel:
a Remove the two (M2.0 x 3.0) screws on the panel [1].
b Slide the display panel away from the system and ip the display panel over [2].
c Peel o the display connector adhesive strip from the display panel [1]
d Peel o the mylar tape securing the display cable on the back of the display panel [2].
e Lift the metal tab and disconnect the display cable from the back of the display panel [3,4].
Removing and installing components
29
To Next Page
Loading...
