a Pull the clips securing the memory module until the module snaps-out [1].
b Remove the memory module from the connector on the system board [2].
Installing memory module
1 Insert the memory module into the connector until snaps in.
2 Install the following:
a battery
b base cover
3 Follow the procedures in After working inside your computer.
Heat sink
Removing heat sink assembly
Heat sink assembly comprises of heat sink and the system fan.
1 Follow the procedure in Before working inside your computer.
2 Remove the following:
a base cover
b battery
3 To remove the heat sink assembly:
NOTE
: To identify the number of screws, see the screw list.
Removing and installing components 19
To Next Page
Loading...
