Display hinge
Removing the display hinge cap
1 Follow the procedure in Before working inside your computer.
2 Remove the following components:
a base cover
b battery
c WLAN card
d WWAN card
e display assembly
3 Slide and remove the display hinge cap from the display panel.
Installing the display hinge cap
1 Place the display hinge cap on the slot and slide it back to t on the display assembly.
2 Install the:
a display assembly
b WLAN card
c WWAN card
d battery
e base cover
3 Follow the procedure in After working inside your computer.
Display panel
28
Removing and installing components
To Next Page
Loading...
