b battery
c WLAN card
d WWAN card
e display assembly
3 To remove the display bezel:
a Use a plastic scribe, nd recess to loosen the bottom edge of the display bezel [1].
b Loosen the tabs on the edges of the display [2,3,4].
NOTE: Adhesive is used to secure the display bezel to the display panel.
4 Remove the display bezel from the display assembly.
Installing display bezel
NOTE
: The display bezel installation procedure is applicable only for non-touch systems.
1 Place the display bezel on the display assembly.
2 Press the edges of the display bezel until it clicks onto the display assembly.
NOTE
: Adhesive is used to secure the display bezel to the display panel.
3 Install the:
a display assembly
b WLAN card
c WWAN card
d battery
e base cover
4 Follow the procedure in After working inside your computer.
Removing and installing components
27
To Next Page
Loading...
