Heat sink
Removing the heat sink
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the stand.
3. Remove the cable cover (optional).
4. Remove the back cover.
5. Remove the system-board shield.
6. Remove the system fan.
About this task
The following image indicates the location of the heat sink and provides a visual representation of the removal procedure.
Steps
1. In reverse sequential order (as indicated on the heat sink), loosen the five captive screws that secure the heat sink to the
system board and the display-assembly base.
2. Slide and lift the heat sink off the system board and display-assembly base.
Removing and installing components
45
To Next Page
Loading...
