Dell OptiPlex 7450 All-In-One - Hard Drive

Hard drive
Removing the hard drive assembly
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. stand
b. back cover
3. To remove the hard drive assembly:
a. Press the tab on the bracket, and slide the hard-drive assembly until the tabs are released from either side of the
assembly [1].
b. Slide the hard-drive assembly upwards to remove it from the computer [2].
4. To remove the hard drive bracket:
a. Pry the edges of the bracket to release the hard drive [1].
b. Slide the hard drive and lift it away from the bracket [2].
24
Disassembly and reassembly