Installing the chassis frame
1. Place the chassis frame on the computer.
2. Tighten the screws to secure the chassis frame to the computer.
3. Affix the adhesive tapes to secure the chassis frame to the computer.
4. Install the:
a. system board
b. power supply unit
c. coin cell battery
d. system fan
e. processor
f. heat sink
g. memory
h. WLAN card
i. system board shield
j. SSD card
k. VESA mount bracket
l. optical drive
m. hard drive
n. cable cover
o. speaker
p. speaker cover
q. back cover
r. stand
5. Follow the procedure in After working inside your computer.
Display panel
Removing the display panel
1. Follow the procedure in Before working inside your computer.
2. Remove the:
Disassembly and reassembly
45
To Next Page
Loading...
