d. speaker cover
e. speaker
f. hard drive
g. optical drive
h. VESA mount bracket
i. system board shield
j. SSD card
k. WLAN card
l. memory
m. heat sink
n. system fan
o. processor
p. coin cell battery
q. power supply unit
r. system board
3. Unroute the cables though the retention clips.
4. To remove the chassis frame:
ā
NOTE:
There is a cable that is taped/glued down to the chassis frame. That cable runs down from the On-Screen
Display (OSD) and into a connector on the Display Bezel for the Power Button board below the OSD Button board.
Trying to lift the chassis frame without disconnecting this cable first could damage the connector.
a. Peel the adhesive tapes that secure the chassis frame [1].
b. Remove the screws that secure the chassis frame to the computer. [2].
NOTE: Chassis frame screws have M3 and M2 stamped next to them.
c. Remove the cables from the chassis frame and lift the chassis frame away from the computer. [3].
44
Disassembly and reassembly
To Next Page
Loading...
