Installing the system board
1. Place the system board on the computer.
2. Connect all the cables to the system board.
3. Tighten the screws to secure the system board to the base panel.
4. Install the:
a. power supply unit
b. coin cell battery
c. system fan
d. processor
e. heat sink
f. memory
g. WLAN card
h. SSD card
i. system board shield
j. VESA mount bracket
k. optical drive
l. hard drive
m. cable cover
n. speaker
o. speaker cover
p. back cover
q. stand
5. Follow the procedure in After working inside your computer.
42
Disassembly and reassembly
To Next Page
Loading...
