EasyManua.ls Logo

Dell OptiPlex 7450 All-In-One - Power Specifications

Dell OptiPlex 7450 All-In-One
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Feature Specification
Network adapter One RJ-45 connector
USB 2.0 (Rear) 0(side)/2
USB 3.0 (Rear) 2(side)/4
USB port
with PowerShare
support
1(side) USB 3.0 Type C connector
Video one display port
HDMI
one 19pin output port
one 19pin input port
Media card
reader
one 4-in-1 slot
Power specifications
Feature
Specification
155 Watt PSU for
UMA
200 Watt dGPU
and UHD(4K)
Frequency 47 Hz 63 Hz
Voltage 90 VAC 264 VAC
Input current
Maximum 2.6 A ( Low AC range)
Maximum 1.3 A ( High AC range)
Camera specifications - optional
Feature
Specification
Image resolution 2.0 megapixel
Video resolution FHD (1080p)
Diagonal viewing
angle
74 degrees
VESA wall mount
Table 10. VESA stand specifications
Type FDMI MIS-D, 100, C
Hole mount pattern 100 x 100 mm
Screw type M4
Minimum clearance from wall 20 mm (0.79 in)
NOTE: Exercise caution not to block the rear venting
holes while maintaining clearance from wall.
Tilt -5 degrees to 30 degrees
76 Technical specifications

Table of Contents

Related product manuals