3. To remove the VESA mount bracket:
a. Remove the screws that secure the VESA mount bracket to the computer [1].
b. Lift the bracket away from the computer [2].
Installing the VESA mount bracket
1. Align and place the bracket in the slot on the computer.
2. Tighten the screws that secure the VESA mount bracket to the computer.
3. Install the:
a. power supply unit
b. system board shield
c. speaker cover
d. cable cover
e. back cover
f. stand
4. Follow the procedure in After working inside your computer.
Converter board
Removing the converter board
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. stand
b. back cover
c. cable cover
d. speaker cover
e. system board shield
f. power supply unit
Disassembly and reassembly
35
To Next Page
Loading...
