Next steps
1 Replace the WLAN
2 Replace the battery
3 Replace the base cover
4 Replace the SD memory card
5 Follow the procedure in after working inside your computer
Display bezel
Removing the display bezel
Prerequisites
1 Follow the procedure in before working inside your computer
2 Remove the SD memory card
3 Remove the base cover
4 Remove the battery
5 Remove the WLAN
6 Remove the display assembly
Steps
1 Push both sides of the display-hinge cover and lift it from the display back-cover.
2 Pry the inner edges of the display bezel.
86
Removing and installing components