About your monitor │ 13
*To avoid signal interference, when a wireless USB device has been connected to a
USB downstream port, it is NOT recommended to connect any other USB devices
to the adjacent port(s).
6 USB Type-C port Connect the USB Type-C cable that came
with your monitor to the computer or mobile
device. This port supports USB Power
Delivery, Data, and DisplayPort video signal.
The SuperSpeed USB 5 Gbps (USB 3.2
Gen1) Type-C port offers the fastest transfer
rate and the alternate mode with DP 1.2
supports a maximum resolution of 3440 x
1440 at 60
Hz, PD 20 V/4.5 A, 15 V/3 A, 9 V/
3
A, 5 V/3 A.
NOTE: USB Type-C is not supported on
versions of Windows prior to Windows 10.
7 SuperSpeed USB
5
Gbps (USB 3.2 Gen1)
Type-B upstream port
Connect the USB cable that came with your
monitor to the computer. Once this cable is
connected, you can use the USB connectors
on the monitor.
8, 10 SuperSpeed USB
5
Gbps (USB 3.2 Gen1)
Type-A downstream
ports (4)
Connect your USB device.*
NOTE: To use these ports, you must connect
the USB Type-A to Type-B upstream cable or
the USB Type-C cable (shipped with your
monitor) to the monitor and to your
computer.
9 RJ45 port Support Ethernet connection 10/100/1000
Mbps. Connect this port to Ethernet with
RJ45 cable. You can use either the USB
Type-C or USB Type-A to Type-B upstream
cable that are shipped with this product to
setup the connection.
11 Soundbar slots Attach your external Soundbar (sold
separately) to the monitor by aligning the
magnetic tabs on the soundbar with the slots
on the monitor.
To Next Page
Loading...
