About your monitor │ 23
Plug and play capability
You can install the monitor in any Plug and Play-compatible system. The monitor
automatically provides the computer system with its Extended Display Identification
Data (EDID) using Display Data Channel (DDC) protocols so that the system can
configure itself and optimize the monitor settings. Most monitor installations are
automatic; you can select different settings if desired. For more information about
changing the monitor settings, see Operating the monitor.
Universal Serial Bus (USB) interface
This section gives you information about the USB ports that are available on the
monitor.
Transfer speed Data rate Maximum power supported
Super-Speed 5 Gbps 5 V/0.9 A (Max, each port)
High speed 480 Mbps 5 V/0.9 A (Max, each port)
Full speed 12 Mbps 5 V/0.9 A (Max, each port)
SuperSpeed USB 5 Gbps (USB 3.2 Gen1)
USB 2.0
Transfer speed Data rate Maximum power supported
High speed 480 Mbps 5 V/0.5 A (Max, each port)
Full speed 12 Mbps 5 V/0.5 A (Max, each port)
Low speed 1.5 Mbps 5 V/0.5 A (Max, each port)
USB Type-C Description
Video DisplayPort 1.2*
Data USB 3.2 Gen1 (5 Gbps)
Power Delivery (PD) Up to 90W
NOTE: This monitor is SuperSpeed USB 5 Gbps (USB 3.2 Gen1) and
High-Speed USB 2.0 compatible.
USB Type-C
*HBR2 is supported.