Dell P93F - P-Sensor Board; Removing the P-Sensor Board

P-sensor board
Removing the P-sensor board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SD card.
3. Remove the secondary M.2 SSD.
4. Remove the base cover.
5. Remove the battery.
6. Remove the SIM card.
7. Remove the secondary memory.
8. Remove the WLAN card.
9. Remove the WWAN card.
10. Remove the primary M.2 SSD.
11. Remove the keyboard lattice.
12. Remove the keyboard.
13. Remove the SD card reader.
14. Remove the GPU power cable.
15. Remove the GPU card.
16. Remove the primary memory.
17. Remove the heat-sink assembly.
18. Remove the inner frame.
19. Remove the system board.
20. Remove the speakers.
21. Remove the middlecap.
22. Remove the display assembly.
23. Remove the display bezel.
24. Remove the display panel.
About this task
The figure indicates the location of the P-sensor board and provides a visual representation of the removal procedure.
Removing and installing components
111