8. Install the WWAN card.
9. Install the WLAN card.
10. Install the secondary memory.
11. Install the primary M.2 SSD.
12. Install the battery.
13. Install the base cover.
14. Install the secondary M.2 SSD.
15. Install the SD card.
16. Follow the procedure in after working inside your computer.
Speaker
Removing the speaker
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SD card.
3. Remove the secondary M.2 SSD.
4. Remove the base cover.
5. Remove the battery.
6. Remove the SIM card.
7. Remove the secondary memory.
8. Remove the WLAN card.
9. Remove the WWAN card.
10. Remove the primary M.2 SSD.
11. Remove the keyboard lattice.
12. Remove the keyboard.
13. Remove the GPU power cable.
14. Remove the GPU card.
15. Remove the primary memory.
16. Remove the heat-sink assembly.
17. Remove the inner frame.
18. Remove the system board.
About this task
The figure indicates the location of the speaker and provides a visual representation of the removal procedure.
Removing and installing components
81
To Next Page
Loading...
