Table 5. BIOS setup options—System information menu (continued)
General-System Information
Primary HDD Displays the primary hard drive information of the computer.
MiniCard SSD Device Displays the MiniCard SSD device information of the computer.
Modular Bay Device Displays the Modular Bay device information of the computer.
System eSATA Device Displays the System eSATA device information of the computer.
ODD Device Displays the ODD device information of the computer.
Dock eSATA Device Displays the Dock eSATA device information of the computer.
LOM MAC Address Displays the LOM MAC address of the computer.
SFP NIC MAC Address Displays the SFP NIC MAC address of the computer.
Managed LOM MAC Address Displays the Managed LOM MAC address of the computer.
Video Controller Displays the video controller type of the computer.
dGPU Video Controller Displays the discrete graphics information of the computer.
Video BIOS Version Displays the video BIOS version of the computer.
Video Memory Displays the video memory information of the computer.
Panel Type Displays the Panel Type of the computer.
Native Resolution Displays the native resolution of the computer.
Audio Controller Displays the audio controller information of the computer.
Wi-Fi Device Displays the wireless device information of the computer.
WiGig Device Displays the WiGig device information of the computer
Bluetooth Device Displays the bluetooth device information of the computer.
Passthrough MAC Address Displays the unique MAC address information of the computer.
Battery Information Displays the battery health, charging state and AC adapter information.
Boot Sequence
Boot Sequence Displays the boot sequence.
Boot List Option Displays the available boot options.
Advanced Boot Options
Enable Legacy Option ROMs Enable or disable the Legacy Option ROMs.
Enable UEFI Network Stack Enable or disable the integrated NIC.
Enable Attempt Legacy Boot Enable or disable Legacy Boot. When enabled, if the system fails to boot the
UEFI Boot List, the system will immediately attempt to boot the Legacy Boot
List. This feature requires Legacy Option ROMS to be enabled and cannot be
used with Secure Boot enabled
UEFI Boot Path Security Enable or disable the system to prompt the user to enter the Admin password
when booting a UEFI boot path from the F12 boot menu.
Date/Time Displays the current date in MM/DD/YY format and current time in HH:MM:SS
AM/PM format.
Table 6. System setup options—System Configuration menu
System Configuration
Integrated NIC Controls the on-board LAN controller.
Enable UEFI Network Stack Enable or disable UEFI Network Stack.
SATA Operation Configure operating mode of the integrated SATA hard drive controller.
Drives Enable or disable various drives on board.
BIOS setup 123
To Next Page
Loading...
