Figure 59. Removing a 2.5-inch (x6) SATA hard drive or SSD and 2.5-inch (x2) PCIe SSD backplane
1. alignment pin (2) 2. power cable
3. retention screw (8) 4. hard-drive or SSD backplane
5. PCIe SSD backplane cable connector 6. PCIe SSD backplane cable
7. SATA hard-drive or SSD backplane cable 8. SATA hard-drive or SSD backplane cable
connector
9. hard-drive or SSD cage
132
To Next Page
Loading...
