Figure 9. Removing the cooling shroud
1. slot (2) 2. cooling shroud
3. retention screw 4. standoff on the cooling shroud retention bar
(2)
Next steps
1. Install the cooling shroud
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Removing the sled
Installing the cooling shroud
After working inside your system
Installing the cooling shroud
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
60
To Next Page
Loading...
