Figure 67. Removing an expander card
1. screw 2. expander-card cable connector
3. expander-card cable 4. standoff (3)
5. expander card
Next steps
1. Install the expander card.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Installing an expander card
Removing the hard-drive or SSD cage
Removing a 2.5 inch (x8) SATA hard-drive or SSD backplane
Removing a 2.5-inch (x8) SAS hard-drive or SSD backplane
Removing a 2.5-inch (x6) SATA hard drive or SSD and 2.5-inch (x2) PCIe SSD backplane
Removing a 1.8-inch (x16) SAS SSD backplane
After working inside your system
145
To Next Page
Loading...
