Figure 31. Installing the IDSDM card
1. IDSDM card 2. screw (2)
3. SD card slot bracket 4. PCIe mezzanine card support bracket
5. connector 6. standoff (2)
Next steps
1. If applicable, install the SD card(s) and the internal USB key.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Replacing the optional internal USB memory key
Replacing an SD card
After working inside your system
rSPI card (optional)
rSPI (restore Serial Peripheral Interface) is a SPI flash device to store information about the system Service
Tag, system configuration, or iDRAC license.
99
To Next Page
Loading...
