Dell PowerEdge R210 - Power Management Screen

46 Using the System Setup Program and UEFI Boot Manager
Power Management Screen
Option Description
Power Management
(Active Power Controller
default)
Options are OS Control, Active Power Controller,
Custom, or Maximum Performance. For all but the
Custom setting, the BIOS pre-configures the power
settings on this screen as follows:
• OS Control sets the CPU power to OS DBPM , the fan
power to
Minimum Power , and the memory power to
Maximum Performance . In this setting, all processor
performance information is passed from the system
BIOS to the operating system for control. The operating
system sets the processor performance based on
processor utilization.
•
Active Power Controller sets the CPU power to System
DBPM
, the fan power to Minimum Power , and the
memory power to
Maximum Performance . The BIOS
sets the processor performance based on
processor utilization.
•
Maximum Performance sets all fields to Maximum
Performance
.
If you select Custom, you can configure each
option independently.
CPU Power and
Performance
Management
Options are OS DBPM, System DBPM, Maximum
Performance, or Minimum Power.
Fan Power and
Performance
Management
Options are Maximum Performance or Minimum Power.
Memory Power and
Performance
Management
Options are Maximum Performance, a specified
frequency, or Minimum Power.
book.book Page 46 Wednesday, August 12, 2009 4:51 PM