Dell PowerEdge R210 - Front Bezel (Optional); Removing the Front Bezel; Installing the Front Bezel

Installing System Components 61
Front Bezel (Optional)
Removing the Front Bezel
1 Using the system key, unlock the front bezel (if locked).
2 Lift up the release latch next to the keylock.
3 Rotate the left end of the bezel away from the front panel.
4 Unhook the right end of the bezel and pull the bezel away from
the system.
Figure 3-2. Removing and Installing the Front Bezel
Installing the Front Bezel
1 Hook the right end of the bezel onto the chassis.
2 Fit the free end of the bezel onto the system.
3 Secure the bezel with the keylock. See Figure 3-2.
1 release latch 2 keylock
3 hinge tab 4 bezel
4
3
2
1
book.book Page 61 Wednesday, August 12, 2009 4:51 PM