68 Installing System Components
Figure 3-5. Removing and Installing a Hard Drive
NOTE: If you are not replacing the hard drive, remove the drive from the drive
bracket (see "Removing a Hard Drive From a Hard-Drive Bracket" on page 70) and
replace the empty bracket back into the drive bay.
7
Close the system. See "Closing the System" on page 63.
1 drive bracket 2 release pin
3 hard drive 4 data cable
5 power cable 6 chassis tabs (4)
1
2
3
5
6
4
book.book Page 68 Wednesday, August 12, 2009 4:51 PM
To Next Page
Loading...
