Table 6. R6625 system rear view features with coolant tubes (continued)
Item Ports, panels, or slots Icon Description
7 USB 3.0 port The USB ports are 9-pin, 3.0-compliant. These ports enable you to
connect USB devices to the system.
8 USB 2.0 port The USB port is 4-pin, 2.0-compliant. This port enables you to
connect USB devices to the system.
9 Dedicated iDRAC9 Ethernet
port
Enables you to remotely access iDRAC. For more information,
see the Integrated Dell Remote Access Controller User's Guide at
www.dell.com/poweredgemanuals.
10 OCP NIC card N/A The OCP NIC card supports OCP 3.0. The NIC ports are integrated
on the OCP card which is connected to the system board.
11 NIC ports The NIC ports that are integrated on the LOM card provide network
connectivity which is connected to the system board.
NOTE: For more information about ports, panels, and slots, see the Technical specifications section.
Inside the system
Figure 7. Inside view of the PowerEdge R6625.
1.
Front Storage cover 2. Fans
3. Air shroud 4. Memory
5. Processor 2 and Heat sink 2 6. System Board
7. PSU 2 8. PSU 1
9. NIC 10. Rear drive module air shroud
11. BOSS Module 12. Processor 1 and Heat sink 1
14 System overview
To Next Page
Loading...
