Dell PowerEdge R6625 - Processor specifications; PSU specifications

Processor specifications
Table 9. PowerEdge R6625 processor specifications
Supported processor Number of processors supported
AMD EPYC 4
th
Generation 9004 Series processor Up to two
PSU specifications
The PowerEdge R6625 system supports up to two AC or DC power supply units (PSUs).
Table 10. PSU specifications
PSU Class Heat
dissipation
(maximum)
(BTU/hr)
Frequenc
y (Hz)
Voltage AC DC Current (A)
High line
wattage
Low line
wattage
800 W
Mixed
Mode
Platinum 3000 50/60 100-240 V AC 800 W 800 W N/A 9.2-4.7 A
N/A 3000
N/A
240 V DC N/A N/A 800 W 3.8A
1100 W
Mixed
Mode
Titanium 4125 50/60 100-240 V AC 1100 W 1050 W N/A 12-6.3 A
N/A 4125
N/A
240 V DC N/A N/A 1100 W 5.2 A
1100 W DC N/A 4265 N/A -48-(-60V) DC N/A N/A 1100 W 27 A
1400 W
Mixed
Mode
Platinum 5250 50/60 100-240V AC 1400 W 1050 W N/A 12-8 A
N/A 5250
N/A
240V DC N/A N/A 1400 W 6.6 A
1800 W
Mixed
Mode
Titanium 6610 50/60 200-240V AC 1800 W N/A N/A 10 A
N/A 6610
N/A
240V DC N/A N/A 1800 W 8.2 A
NOTE: If a system with AC 1400 W/1100 W PSUs operate at low line 100-120 V AC, then the power rating per PSU is
derated to 1050 W.
NOTE: Heat dissipation is calculated using the PSU wattage rating.
NOTE: When selecting or upgrading the system configuration, to ensure optimum power utilization, verify the system
power consumption with the Enterprise Infrastructure Planning Tool available at Dell.com/calc.
Figure 22. PSU power cords
Table 11. PSU power cords
Form factor Output Power cord
Redundant 60 mm 800 W AC C13
1100 W AC C13
1100 W -48 LVDC C13
26 Technical specifications