Dell PowerEdge RAID Controller S100 - Continuing to Boot

RAID Configuration and Management 59
Continuing to Boot
After using the PERC Virtual Disk Management utility, return the system to its
normal booting process by selecting Continue to Boot in the Main
Menu field and pressing <Enter>.
Pause if Degraded When ON, the BIOS stops
booting when a degraded
virtual disk is found.
Press <Enter> to
toggle between ON
and OFF.
Pause if Failed When ON, the BIOS stops
booting when a failed virtual
disk is found.
Press <Enter> to
toggle between ON
and OFF.
Table 6-4. Controller Options
Controller Option Description How to Operate
A5_bk0.book Page 59 Thursday, February 10, 2011 8:34 PM