Dell PowerEdge T430 - Installing a Hard-Drive Blank

Figure 31. Removing a 3.5 inch hard-drive blank
1. hard-drive blank 2. release button
Related links
Installing a hard-drive blank
Removing the optional front bezel
Installing the optional front bezel
Installing a hard-drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the front bezel.
Steps
Insert the hard-drive blank into the hard-drive slot until the release button clicks into place.
Figure 32. Installing a 2.5-inch hard drive blank
1. hard drive blank
103