Dell PowerEdge T430 - Installing a Four-Slot Hard Drive Blank

Figure 51. Removing the four-slot hard drive blank
1. four-slot hard drive blank 2. release tab (4)
3. screwdriver
Next steps
1. Install the four-slot hard drive blank.
2. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing the cooling shroud
Removing the hard drive backplane
Installing a four-slot hard drive blank
After working inside your system
Installing a four-slot hard drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
126