Dell PowerEdge T430 - Front Panel Features of 8 X 3.5-Inch Hot Swappable Hard Drive Chassis in Rack Mode

Indicator, button, or connector Icon Description
port is USB 2.0 compliant. For more information, see
the Integrated Dell Remote Access Controller User’s
Guide at Dell.com/idracmanuals.
USB port
Use the USB 3.0 port to connect USB devices to the
system. These ports are 9-pin, USB 3.0 compliant.
Optical drive or tape-drive bay Allows you to install optical drives or tape drives. For
more information on supported optical drives and tape
drives, see the Optical drives and tape drives section..
Physical drives 3.5 inch hard drives and 2.5 inch hard drives/SSDs.
Related links
LCD panel
Optical drives and tape drives (optional)
Front panel features of 8 x 3.5-inch hot swappable hard drive chassis in rack
mode
Figure 4. Front panel features - 8 x 3.5-inch hot swappable hard drive chassis in rack mode
1. Power button
2. NMI button
3. System identification button
4. LCD menu buttons
5. Information tag
6. LCD panel
7. USB management port/iDRAC Direct port
8. Video connector
16