Dell PowerEdge T430 - Hot-Swappable Hard Drives

Figure 27. Installing the cooling shroud
1. chassis intrusion switch 2. touch points (2)
3. slots (2) 4. chassis intrusion switch connector on
the system board
Next steps
1. If removed, install the full-length PCIe card.
2. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing the cooling shroud
Removing an expansion card
Installing an expansion card
After working inside your system
Hot-swappable hard drives
Your system supports Entry Hard Drives and Enterprise Class Hard Drives. Entry Hard Drives are designed
for 8x5 operating environment with less workload rating to drives and Enterprise Class Drives are
designed for 24x7 operating environment. Selecting the correct drive class will enable the critical areas of
quality, functionality, performance, and reliability to be optimized for the target implementation.
98