Dell PowerEdge T430 - Installing the Optional Front Bezel

Figure 14. Removing the front bezel
1. bezel key
2. bezel
3. release latch 4. system
Next steps
Install the optional front bezel.
Related links
Installing the optional front bezel
Installing the optional front bezel
1. Locate and remove the bezel keys.
NOTE: There are two bezel keys attached to the back of the bezel.
2. Insert the bezel tabs into the bezel tab slots in the chassis.
3. Press the release latch, and push the bezel toward the system until the bezel locks into place.
4. Lock the bezel by using the key.
81