Removing a power supply unit adapter
Re
move the PSU adapter, when installing PSU with 86 mm wide form factor.
Prerequisites
Follow the safety guidelines listed in the Safety instructions.
Steps
Press release latch and remove the power supply unit adapter.
Figure 186. Removing a power supply unit adapter
Ne
xt steps
Replace the power supply unit adapter or Install the power supply unit.
Installing a power supply unit adapter
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. If required, remove the power supply unit.
NOTE:
Remove the PSU adapter, when installing PSU with 86 mm wide form factor.
Steps
A
l
ign and insert the power supply unit adapter, until the adapter clicks into place.
Figure 187. Installing a power supply unit adapter
R
e
moving a power supply unit
Prerequisites
CAUTION: T
he system needs one power supply unit (PSU) for normal operation. On power-redundant systems,
remove and replace only one PSU at a time in a system that is powered on.
1. Follow the safety guidelines listed in S
afety instructions.
Installing and removing system components 229
To Next Page
Loading...
